LaserTag device, micropython, Raspberry Pi Pico, ESP32
Go to file
2024-05-21 01:40:16 +02:00
.vscode add micropico 2024-05-13 22:02:47 +02:00
lib up 2024-05-17 00:32:12 +02:00
.micropico add micropico 2024-05-13 22:02:47 +02:00
ble_advertising.py BLE test 2024-05-13 23:45:28 +02:00
ble_main_2.py BLE remote.py running 2024-05-15 00:48:24 +02:00
ble_main_3.py add RGB 2024-05-21 01:40:16 +02:00
ble_main.py BLE remote.py running 2024-05-15 00:48:24 +02:00
ble_simple_peripheral.py BLE test 2024-05-13 23:45:28 +02:00
LT_remote_control_box.md TX RX test run 2024-05-16 00:45:36 +02:00
main.py add RGB 2024-05-21 01:40:16 +02:00
README.md ir tx test run 2024-05-16 14:39:51 +02:00
remote.py BLE remote.py running 2024-05-15 00:48:24 +02:00
rgb.py add RGB 2024-05-21 01:40:16 +02:00
test01.py add test 2024-05-13 22:26:33 +02:00
test_olt_ir.py up 2024-05-17 00:32:12 +02:00

lasertag_device_micropython

Lasertag device, MicroPython

Raspberry Pi Pico W

MicroPython FW: https://micropython.org/download/RPI_PICO_W/

Pi Pico W datasheet https://datasheets.raspberrypi.com/picow/pico-w-datasheet.pdf

PCB 51x21mm, 1mm hole 20x8(10) 2.54 pitch grid

Pi Pico BLE: https://electrocredible.com/raspberry-pi-pico-w-bluetooth-ble-micropython/

Micropython IR: https://github.com/peterhinch/micropython_ir/blob/master/RECEIVER.md

Pi Pico VSCode: https://randomnerdtutorials.com/raspberry-pi-pico-vs-code-micropython/

Install IR test lib

$ mpremote connect /dev/ttyACM0 mip install "github:peterhinch/micropython_ir/ir_tx" $ mpremote mip install "github:peterhinch/micropython_ir/ir_rx" $ mpremote mip install "github:peterhinch/micropython-async/v3/primitives"

install LT

install primitives lib $ mpremote mip install "github:peterhinch/micropython-async/v3/primitives"

install lib folder on device $ mpremote connect /dev/ttyACM0 cp -r ./lib :

install main.py $ mpremote connect /dev/ttyACM0 cp ./main.py :